Williams Sound PPA R35-8 User's Guide download pdf (Page 7)

STEP 5: CONNECT THE AUDIO SOURCE

On the back of the T27, an RCA-type “Audio In” jack is available

for connecting a line-level, unbalanced audio source. On the front

of the T27, a 3.5mm “Mic Input”jack is available to connect a

Williams Sound electret microphone. Connect the desired audio

source to the T27 transmitter and proceed to Step 6.

STEP 6: ADJUST THE AUDIO LEVEL

With the audio source playing, use a small screwdriver or tuning

wand to rotate the “Adjust” control on the front of the T27: 1)

clockwise to increase the audio level; or 2) counterclockwise to

decrease the audio level. Refer to the audio “Level” indicator

LED on the front of the T27 as you make your adjustments:

Audio Level Indicator LED

1.) Never On =Audio source is TOO LOW.

2.) Blinks occassionally =Audio source is OPTIMAL.

3.) Always on =Audio source is TOO HIGH.

STEP 7: LISTEN WITH AN FM RECEIVER

IMPORTANT: The FM receiver being used with the T27

transmitter will need to be on the same frequency as the

transmitter.

Install the receiver batteries, plug in the earphone, turn on the

receiver and walk around the listening area. The signal should be

clear and quite loud when the volume is turned up. See pages

10-13 for detailed receiver instructions.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Williams Sound PPA R35-8 User's Guide Page 7