Williams Sound SoundPlus Infrared System WIR SYS 90V Installation Guide download pdf (Page 12)

SoundPlus

Infrared Listening System

MAN 132H

Power On Baseband On

Multi-Channel Infrared Transmitter

Made in U.S.A.

24 VACNC

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Power In:

24VAC

50-60Hz

35VA

Power Supply Wiring:

Baseband Signal Wiring:

Note: It is normal for this unit to feel warm while it is in operation.

Plug

Use NEC, Class 2 Wiring, 18 ga. minimum,

200 ft. (70m) maximum length (18 ga.)

Use 50 Ohm Coaxial Cable (RG58)

Use RG58 Coax,1000 ft. (350m) max. length

www.williamssound.com

InOut Out

50 Ohms

Baseband

(Modulation)

Mounting

Bracket

RoHS

Class 1

LED Product

Williams Sound, Minneapolis, Minnesota, USA

Patent Pending

A257

WALL / CEILING MOUNTING BRACKET

FOR USE WITH BKT 024 MOUNTING BRACKET

POWER ON LED

VISIBLE ON BOTTOM

BASEBAND ON LED

VISIBLE ON BOTTOM

BASEBAND OUT

BNC CONNECTOR, 50Ω

50 kHz-8 MHz BASEBAND

BASEBAND IN

BNC CONNECTOR, 50Ω

50 kHz-8 MHz BASEBAND

POWER IN

120 VAC (US); TFP 010 POWER SUPPLY

230 VAC (CE); TFP 027 POWER SUPPLY

BKT 024

CEILING MOUNT WALL MOUNT

BKT 024

A258

WIR TX9

EMITTER

WIR TX9

EMITTER

T-BAR CLIP

OPTIONAL MOUNTING

FOR SUSPENDED CEILING

WITH CROSS TEE

Mounting the TX9

Figure 16: Mounting the TX9 to a wall, ceiling, or suspended ceiling with the BKT 024 using a Mounting Plate or a T-Bar Clip

TX9 Features and Controls

Figure 15: TX9 Emitter Rear View

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Williams Sound SoundPlus Infrared System WIR SYS 90V Installation Guide Page 12

Comments to this Manuals

Related products and manuals for Receiver Williams Sound SoundPlus Infrared System WIR SYS 90V