Williams Sound PPA R38 User Manual download pdf (Page 10)

Personal PA

DSP FM Wideband Transmitter

Figure 6: T45 Typical Connections

A407

24VDC 0.75A

williamssound.com

Line / Mic In

Analog

Audio

Digital

Audio

Line Out AES / EBU In S/PDIF In RF 75 Ω Ant Ethernet

bal

—

unbal

—

phantom

ANALOG AUDIO

LINE OUT (RCA)

ANALOG

LINE/MIC INPUT

(XLR OR 1/4”)

BALANCED,

UNBALANCED,

OR PHANTOM.

DIGITAL

LINE

INPUT

(RCA)

REMOTE

ANTENNA

CONNECTION

(RG-6 QS,F-CONN)

PPA T45

ANALOG MIXER OR AUDIO SYSTEM

AUDIO LINE IN (RCA)

ROUTER

ANALOG LINE

OUTPUT

(1/4” or XLR)

DIGITAL

LINE

INPUT

(XLR)

AES or EBU.

PPA T45NET ONLY

DEVICE OR MIXER WITH S/PDIF OUTPUT

DIGITAL LINE OUT (RCA)

DIGITAL MIXER

REMOTE

ANTENNA

STANDARD CAT5 ETHERNET CABLE (RJ-45)

MICROPHONE

(CONDENSER

OR OTHER)

ANALOG MIXER

DIGITAL LINE

OUTPUT

(XLR)

AES or EBU.

COMPUTER

ETHERNET

SWITCH

INTERNET

MODEM

STANDARD

CAT5

ETHERNET

CABLES

(RJ-45)

TO AC

POWER

SOURCE

STANDARD CAT5 ETHERNET CABLE (RJ-45)

LAPTOP (OR DESKTOP)

COMPUTER

SUPPLIED

ANTENNA

EITHER

BUT

NOT

BOTH

Connecting the T45 to other Devices

The Analog LINE/MIC Input jack can be used with standard pro audio electronics such as standard pro audio line level,

condenser microphones up to 15v or an analog line output from a mixer. The combination jack accepts either XLR or 1/4” (TRS).

This source must be congured in the menu before plugging the source into the jack.

The RCA Audio Line Output jack can be used for monitoring, recording, or routing processed audio to another sound system.

The XLR Digital Line Input can be used with the output of a digital mixer or digital audio source. The processors inside the T45

convert the digital bitstream into usable audio.

The RCA S/PDIF Digital Line Input jack can be used with a device that has an RCA Digital Audio Out (also referred to as “Coaxial

Digital Audio” from consumer electronic devices. The processors inside the T45 convert the digital bitstream into usable audio.

The Remote Antenna Connection can be used to connect a remote antenna to the T45 when the whip antenna won’t be used

(as in the case of rack-mounting). See the Williams Sound Antenna Guide for a full range of antenna and mounting options (see

Figure 5).

The Ethernet Jack (PPA T45NET only) can be used to connect the T45NET to either (1) a local network or (2) directly to a single

computer. Both options can use either a standard Ethernet cable or a crossover cable. A crossover cable can be used, but is not

required to connect the T45 directly to a computer, because an internal MUX senses the device that is connected and crosses the

pins automatically.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Comments to this Manuals

No comments

Williams Sound PPA R38 User Manual Page 10

Comments to this Manuals

Related products and manuals for Receiver Williams Sound PPA R38