Williams Sound PPA R38 User Manual download pdf (Page 23)

Personal PA

DSP FM Wideband Transmitter

the front, and the description is displayed as one of the elds on the main info screen. On the web interface (PPA T45NET

only), the description appears on the Home page (Figure 18), making it easy to identify which transmitter the web page is

controlling. Note that the default description “YOUR T45 NAME HERE” will appear if it has not changed. It’s also possible to

enter all blanks in the description eld, and then the description will be blank on the front display.

To change the Description:

1. Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2. Press the “v” button repeatedly until “PREFERENCES” is displayed in the selection box.

3. Press the “>” button to access the Preferences.

4. Press the “v” button repeatedly until “DESCRIPTION” is displayed in the selection box.

5. Press the “>” button to access the “DESCRIPTION” eld. If a description has not been previously entered, the default

text “YOUR T45 NAME HERE” will be displayed. If a description was previously entered, the character positions will

already be lled with the current name. Note: The default Description “YOUR T45 NAME HERE” will not show on the

Main Info Screen unless it has been modied. When the Description is changed to all spaces, this will also prevent a

description from appearing on the Main Info Screen.

6. Press the “>” button to edit the description.

7. Press the “^” or “v” buttons to scroll through the characters.

8. Press the “>” button to advance to the next character position.

9. Repeat steps 7 and 8 until the last character is changed.

10. Press the “>” button to step through any remaining positions and press “>” once more to exit out of the description

eld.

11. The cursor is now highlighting “DONE EDITING”. If you want to save the description, push the “v” button (as shown).

If you wish to clear all of the characters and start over, push the “>” button to hightlight “CLEAR ALL” then push the “v”

button to clear the characters. When nished editing, the screen will return to the description you just entered, so you

can check it. At this point the description is active.

12. Press the Menu button to exit the menu and return to the main info screen.

3e. Restore Defaults

The Restore Defaults action will restore the transmitter to it’s original factory settings. This includes the Audio Preset, Input

Source, Input Level, Headphone Source, RF Channel/Freq, RF Output Power, RF Time-Out, Display Mode, Channel Mode,

Screen Time-Out, and Description. If the optional Ethernet Module is installed, it will also reset the IP address, Subnet Mask,

IP Address Mode, and Web Page Security Password.

Note: Restoring defaults from the front panel will restore (reset) all settings. Restoring defaults from the web page will restore

(reset) all settings except NET connectivity settings (IP Address, Subnet Mask, IP Address Mode, and Web Password). This

maintains connectivity between the Web Page and the T45, after the T45 reboots.

To restore the transmitter to its factory default settings (from the front panel):

1. Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2. Press the “v” button repeatedly until “PREFERENCES” is displayed in the selection box.

3. Press the “>” button to access the Preferences.

4. Press the “v” button until “RESTORE DEFAULTS” is displayed in the selection box.

5. Press the “>” button to access the “RESTORE DEFAULTS” Setting. The currently selected choice “NO” will be shown

in the selection box.

6. Press the “v” button to select “YES” (if desired).

7. If “YES” is desired, push the “>” button and verify the same selection on the “warning” screen to perform the reset.

If “NO” is desired, push the “<” button to step back out of this setting, or press the Menu button to exit back to the

Main Info Screen without resetting the transmitter.

8. If “YES” was selected in step 7, the transmitter is now resetting and re-booting. If “NO” was selected in step 7, press

the Menu button to exit the menu and return to the main info screen.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Comments to this Manuals

No comments

Williams Sound PPA R38 User Manual Page 23

Comments to this Manuals

Related products and manuals for Receiver Williams Sound PPA R38