Williams Sound PPA R38 User Manual download pdf (Page 26)

Personal PA

DSP FM Wideband Transmitter

Network Setup for Hard-wired Ethernet Devices (Laptop or Desktop PC)

The PPA T45NET provides a web interface (set of web pages) to manage the transmitter settings. These web pages can be

accessed over an Ethernet network, either hard-wired (through a laptop or desktop PC) or wireless (through an iPad, Android

tablet, or smart phone). The web pages can be accessed with nearly all internet browsers, like any website. Nearly all of the

settings that can be changed on the transmitter can be accessed and changed through the front panel controls - or the web

pages. Note that the web pages have a different look and feel than the front panel menu tree, but nearly all of the same settings

can be accessed (not on web page: Screen Time-out, Headphone Source, Headphone Volume).

1. It is assumed that the network has already been set up, and a laptop or desktop pc is connected on the network.

2. Determine an appropriate static IP address for the T45. If using dynamic IP Addressing, skip to step 4.

a. If someone set up your network, they may be able to help you determine an appropriate IP address (i.e. network system

administrator).

b. There should be no other device having this same address on the network.

c. This will be an address on the same subnet as the router.

d. For example, if the router’s address is 192.168.1.1, the rst three sets of numbers will be the same (i.e. 192.168.1), and the

last number will be the number you determine for the T45 (i.e. .100), making the IP address for the T45 “192.168.1.100”.

When you determine this address, remember or write it down. You will need it for a later step.

3. Set the Static IP Address for the T45 by using the controls on the front of the T45.

a. Enter the IP Address you determined in step 2. (When entering/saving the new address, the T45 will automatically change

its IP Address Mode to STATIC)

b. All settings in the T45 take place immediately (they change when saved).

4. Plug the network cable into the T45.

5. Connect to the T45 with the Laptop or Desktop PC.

If using a Static IP Address:

a. Open the web browser on the Laptop or Desktop PC.

b. In the address bar of the browser, type in the address of the T45 (from step 2) and hit “Enter”.

c. You should see the Log In Page of the T45 (see Figure 18).

d. Log In using the default user name “admin” and password “admin”.

If using DHCP (Dynamic IP Addressing):

When using DHCP addressing, the IP Address can be viewed on the front panel of the T45NET. However, when doing

remote installation, there is an optional discovery utility program available on our website called the “Williams Sound

Device Discoverer Tool”. This tool allows the discovery of T45NET devices on a local network and shows their IP Address.

a. Once downloaded and installed, open the “Williams Sound Device Discoverer.jar” Tool on the Laptop or Desktop PC.

(If the tool doesn’t open you may need to update the PC to the latest version of Java). The T45(s) should show up with it’s

(their) IP Address (see gure 15). Write the IP Address down, you’ll need it for a later step.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

No comments

Williams Sound PPA R38 User Manual Page 26