Williams Sound PPA R7 User's Guide download pdf (Page 14)

Williams Sound

Helping People Hear

BANDWIDTH (M2)

The default LCD menu screen (as shown on page 11, Figure 10) will always display the user selected

bandwidth as “Wideband” or “Narrowband.” The T35 is shipped from the factory in Wideband mode.

First determine the bandwidth of the associated receiver, then set the T35 to that bandwidth:

1) Press the “ ” menu button (Figure 12) to access the LCD “Bandwidth” (M2) screen.

2) Press the “+” or “-” menu buttons to select between Narrowband and Wideband.

3) When the desired bandwidth is displayed, press the “Set” button to save the change into memory.

No additional action is necessary. After 30 seconds of inactivity, the LCD screen will return to the default

screen, where the selected bandwidth will be displayed.

FREQUENCY (M3)

First determine the bandwidth and frequency of the associated receiver, then set the T35 to that bandwidth

(see above) and frequency:

vailable Frequencies:

1 If the wideband operation is selected, 10 wideband frequencies and 7 non-standard wideband

frequencies are available. Standard Frequencies:

72.100 (CH A), 72.300 (CH B), 72.500 (CH C), 72.700 (CH D), 72.900 (CH E), 74.700 (CH I),

75.300 (CH J), 75.500 (CH F), 75.700 (CH G) and 75.900 MHz (CH H).

Non-standard Frequencies:

72.2 (CH K), 72.4 (CH N), 72.6 (CH 0), 72.8 (CH P), 75.4 (CH R), 75.6 (CH S), 75.8 (CH T).

If the narrowband operation is selected, seventy-seven narrowband frequencies are available:

72.025, 72.050, 72.075, 72.100, 72.125, 72.150, 72.175, 72.200, 72.225, 72.250, 72.275, 72.300,

72.325, 72.350, 72.375, 72.400, 72.425, 72.450, 72.475, 72.500, 72.525, 72.550, 72.575, 72.600,

72.625, 72.650, 72.675, 72.700, 72.725, 72.750, 72.775, 72.800, 72.825, 72.850, 72.875, 72.900,

72.925, 72.950, 72.975, 74.625, 74.650, 74.675, 74.700, 74.725, 74.750, 74.775, 75.225, 75.250,

75.275, 75.300, 75.325, 75.350, 75.375, 75.400, 75.425, 75.450, 75.475, 75.500, 75.525, 75.550,

75.575, 75.600, 75.625, 75.650, 75.675, 75.700, 75.725, 75.750, 75.775, 75.800, 75.825, 75.850,

75.875, 75.900, 75.925, 75.950, and 75.975 MHz.

The

T35 is shipped from the factory with the frequency pre-set to 72.900 MHz.

o change the frequency:

1) Press the “ ” menu button to select the LCD

“Frequency” (M3)

screen.

2) To increase the frequency, press the “+” menu button.

To decrease the frequency, press the “-” menu button.

Holding down the “+” or “-” menu buttons will change the frequency automatically until the highest

or lowest available frequency has been met.

3) When the desired frequency is displayed, press the “Set” button to save the change into memory.

No additional action is necessary

new adjustment may now be made, or after 30 seconds of

inactivity, the LCD screen will return to the default screen, where the selected frequency will be

displayed.

NOTE:

The

T35 will not broadcast on the newly selected frequency until the “set” button has been pressed.

REMINDER: If the lock icon is displayed on the default display

, the menu screens are locked, and you will not be

able to make changes. To unlock the menu screens, refer to the instructions on page 11.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments

Williams Sound PPA R7 User's Guide Page 14

Comments to this Manuals

Related products and manuals for Receiver Williams Sound PPA R7