Williams Sound PPA R38 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
PPA R38 FM Receiver
Specications
Dimensions:
4.1” x 2.85” x 1.38” (104 x 72 x 35mm)
Weight:
4.6oz (130g) with batteries. 2.6oz (73g) without batteries
Color:
Black/Silver. Black ABS Plastic case with Aluminum faceplate.
Battery Type:
(2) AA Alkaline or (2) AA NiMH Rechargeable
Battery Life:
(2) AA non-rechargeable alkaline batteries (BAT 001-2), approx. 50 hrs
(2) AA rechargeable NiMH batteries (BAT 026-2), 1500mAh, approx. 32 hrs
Current Consumption:
47mA nominal at 2.4VDC
Operating Temp. Range:
32° – 122°F (0° to 50°C)
Channels:
17 Wideband, accessed via menu
Operating Frequencies:
72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz*
FM Deviation:
75 kHz
De-Emphasis:
75 µS
Display Screen:
1” OLED
Power Indication:
Power button, backlit green.
Good battery strength - glows solid. Low battery - ashes. Error - fast ashes with 1 sec. delay.
Sensitivity:
2 µV at 12 dB Sinad with squelch defeated
Input Overload:
100 mV
Frequency Response:
200 Hz – 15 kHz, ±3dB
Modulation:
FM, +/- 75 kHz peak deviation
Signal-to-Noise Ratio:
Minimum 65 dB @ 1.0V
Receive Antenna:
Integral with earphone/headphone cord
Audio Output:
18 mW max at 32 Ω
Headphone Connector:
3.5 mm stereo jack, mono output for stereo or mono earphones, headphones, or neckloops
Earphone/Headphone/
Neckloop Impedance:
32 Ω
Power Save - Display Off/
Sleep Mode/Auto Off:
Display Off: 5,30, or 60 seconds of no button pushes (adjustable in menu)
Sleep Mode: 6 mins of no RF signal or button pushes; wakes up with RF signal or any button push
Auto Off: 2 hours of no RF signal or button pushes
Approvals:
FCC, Industry Canada, RoHS, WEEE
Warranty:
Lifetime PLUS Limited Warranty, 90 Days on most accessories.
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
This device complies with “RSS-Gen Issue 2 June 2007” for Industry Canada and FCC part 15.105[b] for the United States.
Operation is subject to the following two conditions: [1] this device may not cause interference, and [2] this device must accept any interfer-
ence, including interference that may cause undesired operation of the device.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) this device must accept any interference, including any interference that may cause undesired
operation of the device.
Cet appareil est conforme à la norme RSS Industrie Canada exempt de licence. Son fonctionnement est soumis aux deux conditions suiv-
antes: (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences
pouvant causer un mauvais fonctionnement du dispositif.
This device complies with ICES-003 class B. Test data is available from the manufacturer on request.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments